Publikationen

2024

Triple-junction perovskite–perovskite–silicon solar cells with power conversion efficiency of 24.4%
Hu, H.; An, S. X.; Li, Y.; Orooji, S.; Singh, R.; Schackmar, F.; Laufer, F.; Jin, Q.; Feeney, T.; Diercks, A.; Gota, F.; Moghadamzadeh, S.; Pan, T.; Rienäcker, M.; Peibst, R.; Nejand, B. A.; Paetzold, U. W.
2024. Energy & Environmental Science. doi:10.1039/d3ee03687a

2023

Induktive UV-Strahler: Simulation und Vermessung
Gehring, T.; Jin, Q.; Dycke, J.; Alemu, B. T.; Anantharaman, R.; Kling, R.
2023, Juli 7. 27. Symposium der Deutschen Akademie für Photobiologie und Phototechnologie (DAfP 2023), Quedlinburg, Deutschland, 6.–7. Juli 2023

Kapazitiv gekoppelte Plasmastrahler zur Erzeugung von 222 nm Excimerstrahlung mit gedruckten Elektrodenstrukturen : Krypton-Chlorid- Flachlampen zur flächigen Erzeugung von UV-Strahlung
Alemu, B. T.; Gehring, T.; Huber, R.; Anantharaman, R.; Jin, Q.; Dycke, J.; Kling, R.
2023, Juli 6. 27. Symposium der Deutschen Akademie für Photobiologie und Phototechnologie (DAfP 2023), Quedlinburg, Deutschland, 6.–7. Juli 2023

Void-free buried interface for scalable processing of p-i-n-based FAPbI3 perovskite solar modules
Hu, H.; Ritzer, D. B.; Diercks, A.; Li, Y.; Singh, R.; Fassl, P.; Jin, Q.; Schackmar, F.; Paetzold, U. W.; Nejand, B. A.
2023. Joule, 7 (7), 1574–1592. doi:10.1016/j.joule.2023.05.017

Electrical Conductivity and Photodetection in 3D‐Printed Nanoporous Structures via Solution‐Processed Functional Materials
Xia, K.; Dong, Z.; Sun, Q.; Debastiani, R.; Liu, S.; Jin, Q.; Li, Y.; Paetzold, U. W.; Gumbsch, P.; Lemmer, U.; Eggeler, Y. M.; Levkin, P. A.; Hernandez-Sosa, G.
2023. Advanced Materials Technologies, 8 (23), Art.Nr.: 2300408. doi:10.1002/admt.202300408

Plasma Water Activation with an Inductive Plasma Torch at Atmospheric Pressure
Gehring, T.; Eizaguirre, S.; Jin, Q.; Dycke, J.; Wang, Y.; Kling, R.
2023, März 27. 49th IOP Annual Plasma Physics Conference (2023), Oxford, Vereinigtes Königreich, 27.–30. März 2023

The Impact of Carbon Nanotube Length and Diameter on their Global Alignment by Dead‐End Filtration
Rust, C.; Shapturenka, P.; Spari, M.; Jin, Q.; Li, H.; Bacher, A.; Guttmann, M.; Zheng, M.; Adel, T.; Walker, A. R. H.; Fagan, J. A.; Flavel, B. S.
2023. Small, 19 (10), 1–13. doi:10.1002/smll.202206774

Characterization of Argon/Hydrogen Inductively Coupled Plasma for Carbon Removal over Multilayer Thin Films
Wang, Y.; Gehring, T.; Jin, Q.; Dycke, J.; Kling, R.
2023. Coatings, 13 (368), Article no: 368. doi:10.3390/coatings13020368

Large area dichroic mirrors by multilayer inkjet printing
Lemmer, U.; Zhang, Q.; Jin, Q.; Roesch, A.
2023. Novel Optical Systems, Methods, and Applications XXVI, 18, SPIE. doi:10.1117/12.2682051

Distributed Feedback Lasers by Thermal Nanoimprint of Perovskites Using Gelatin Gratings
Allegro, I.; Bonal, V.; Mamleyev, E. R.; Villalvilla, J. M.; Quintana, J. A.; Jin, Q.; Díaz-García, M. A.; Lemmer, U.
2023. ACS Applied Materials & Interfaces, 15 (6), 8436–8445. doi:10.1021/acsami.2c22920

2022

Fabrication of patterned, flexible and large-scale Bragg mirrors by inkjet printing
Zhang, Q.; Jin, Q.; Mertens, A.; Huber, R.; Fessler, J.; Hernandez-Sosa, G.; Lemmer, U.
2022. W. Park, A.-J. Attias & B. Panchapakesan (Hrsg.), Nanoengineering: Fabrication, Properties, Optics, Thin Films, and Devices XIX, 7, SPIE. doi:10.1117/12.2633359

Fabrication of Microlens Arrays with High Quality and High Fill Factor by Inkjet Printing
Zhang, Q.; Schambach, M.; Schlisske, S.; Jin, Q.; Mertens, A.; Rainer, C.; Hernandez-Sosa, G.; Heizmann, M.; Lemmer, U.
2022. Advanced Optical Materials, 10 (14), Article no: 2200677. doi:10.1002/adom.202200677

Fabrication of Bragg Mirrors by Multilayer Inkjet Printing
Zhang, Q.; Jin, Q.; Mertens, A.; Rainer, C.; Huber, R.; Fessler, J.; Hernandez-Sosa, G.; Lemmer, U.
2022. Advanced Materials, 34 (33), Article no: 2201348. doi:10.1002/adma.202201348

Lasing from Laminated Quasi‐2D/3D Perovskite Planar Heterostructures
Li, Y.; Roger, J.; Allegro, I.; Fischer, J. C.; Jin, Q.; Lemmer, U.; Howard, I. A.; Paetzold, U. W.
2022. Advanced Functional Materials, 32 (27), Artkl.Nr.: 2200772. doi:10.1002/adfm.202200772

SiC-based Resonant Converters with ZVS Operated in MHz Range Driving Rapidly Variable Loads: Inductively Coupled Plasmas as a Case of Study
Eizaguirre Cabrera, S.; Gehring, T.; Denk, F.; Jin, Q.; Dycke, J.; Renschler, M.; Hiller, M.; Lemmer, U.; Kling, R.
2022. IEEE transactions on power electronics, 37 (7), 7775–7788. doi:10.1109/TPEL.2022.3147947

Silver-Nanoparticle-Based Metallodielectric Wavelength-Selective Reflectors for Quantum-Dot-Enhanced White-Light-Emitting Diodes
Chen, J.; Theobald, D.; Shams, A. B.; Jin, Q.; Mertens, A.; Gomard, G.; Lemmer, U.
2022. ACS applied nano materials, 5 (1), 87–93. doi:10.1021/acsanm.1c02885

Sn-Pb Mixed Perovskites with Fullerene-Derivative Interlayers for Efficient Four-Terminal All-Perovskite Tandem Solar Cells
Hu, H.; Moghadamzadeh, S.; Azmi, R.; Li, Y.; Kaiser, M.; Fischer, J. C.; Jin, Q.; Maibach, J.; Hossain, I. M.; Paetzold, U. W.; Abdollahi Nejand, B.
2022. Advanced Functional Materials, 32 (12), Art.-Nr.: 2107650. doi:10.1002/adfm.202107650

2021

On the Temperature and Plasma Distribution of an Inductively Driven Xe-I2-Discharge
Gehring, T.; Eizaguirre, S.; Jin, Q.; Dycke, J.; Renschler, M.; Kling, R.
2021. Plasma, 4 (4), 745–754. doi:10.3390/plasma4040037

Pixelated Smart Window for High Dynamic Range Signage Displaying Applications
Jin, Q.; Zhang, Q.; Chen, J.; Gehring, T.; Eizaguirre Cabrera, S.; Huber, R.; Gomard, G.; Lemmer, U.; Kling, R.
2021, Oktober. 6th Smart Materials and Surfaces (SMS 2021), Mailand, Italien, 20.–22. Oktober 2021

Localized Plasmon Field Effect of Gold Clusters Embedded in Nanoporous Silicon
Wu, R.; Mathieu, T.; Storey, C. J.; Jin, Q.; Collins, J.; Canham, L. T.; Kaplan, A.
2021. Advanced optical materials, 9 (9), Article no: 2002119. doi:10.1002/adom.202002119

Global Alignment of Carbon Nanotubes via High Precision Microfluidic Dead-End Filtration
Rust, C.; Li, H.; Gordeev, G.; Spari, M.; Guttmann, M.; Jin, Q.; Reich, S.; Flavel, B. S.
2021. Advanced Functional Materials, 32 (10), Art.-Nr.: 2107411. doi:10.1002/adfm.202107411

High Dynamic Range Smart Window Display by Surface Hydrophilization and Inkjet Printing
Jin, Q.; Zhang, Q.; Chen, J.; Gehring, T.; Eizaguirre, S.; Huber, R.; Gomard, G.; Lemmer, U.; Kling, R.
2021. Advanced materials technologies, 5 (7), Art.-Nr.: 2101026. doi:10.1002/admt.202101026

Gold nanoplasmonic particles in tunable porous silicon 3D scaffolds for ultra-low concentration detection by SERS
Wu, R.; Jin, Q.; Storey, C. J.; Collins, J.; Gomard, G.; Lemmer, U.; Canham, L. T.; Kling, R.; Kaplan, A.
2021. Nanoscale horizons, 6 (10), 781–790. doi:10.1039/D1NH00228G

2020

Inductive Medium Pressure UV-Source
Gehring, T.; Denk, F.; Jin, Q.; Eizaguirre, S.; Kling, R.
2020. Plasma, 3 (1), 1–9. doi:10.3390/plasma3010001

2019

Inductively-Driven Highly-Efficient Low-Pressure UVC Lamp System For Water Treatment
Jin, Q.; Gehring, T.; Kling, R.
2019, November 13. 12th International Conference on Plasma Science and Applications (ICPSA 2019), Lucknow, Indien, 11.–14. November 2019

Medium Pressure Inductive Driven Lamps For UV- Water- Treatment
Gehring, T.; Jin, Q.; Kling, R.
2019, November 11. 12th International Conference on Plasma Science and Applications (ICPSA 2019), Lucknow, Indien, 11.–14. November 2019

IRFi-SDR: An IR software defined radio
Heidinger, M.; Hanebeck, F.; Jin, Q.; Kling, R.; Heering, W.
2019. Global LIFI Congress (GLC 2019), Paris, F, June 12-13, 2019, Article No.8864113, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/GLC.2019.8864113

Reducing the Transition Hysteresis of Inductive Plasmas by a Microwave Ignition Aid
Gehring, T.; Jin, Q.; Denk, F.; Eizaguirre, S.; Karcher, D.; Kling, R.
2019. Plasma, 2 (3), 341–347. doi:10.3390/plasma2030026